Cisco Small Business 300 1.1 Series Administration Manual page 314

Green Ethernet
78-20269-01 Command Line Interface Reference Guide
Command Mode
Privileged EXEC mode
User Guidelines
The following describes all possible reasons the show command displays, and
their descriptions.
If there are a several reasons for non-operation, then only the highest priority
reason is displayed.
Energy-detect Non-operational Reasons
Priority Reason
1 NP
2 LT
3 LU
Short-Reach Non-operational Reasons
Priority Reason
1 NP
2 LT
3 LS
4 LL
6 LD
Example
console# show green-ethernet
Energy-Detect mode: Enabled
Short-Reach mode: Disabled
Power Consumption: 76% (3.31W out of maximum 4.33W)
Cumulative Energy Saved: 33 [Watt*Hour]
Short-Reach cable length threshold: 50m
Description
Port is not present
Link Type is not supported (fiber, auto
media select)
Port Link is up – NA
Description
Port is not present
Link Type is not supported (fiber)
Link Speed Is not Supported
(100M,10M,10G)
Link Length received from VCT Test exceed
threshold
Port Link is Down – NA
25
315