Cdp Log Mismatch Native - Cisco Small Business 300 1.1 Series Administration Manual

CDP Commands
78-20269-01 Command Line Interface Reference Guide
Default Configuration
The switch reports voip mismatches from all ports.
Command Mode
Global Configuration mode
Ethernet Interface
Example
console(conf) interface gi1
console(conf-if) cdp log mismatch voip

45.10 cdp log mismatch native

Use the cdp log mismatch native Global and Interface Configuration mode
command to enable validating that the native VLAN received in a CDP packet
matches the actual native VLAN of the port. If not, a SYSLOG native mismatch
message is generated. The no format of the CLI command disables the generation
of the SYSLOG messages.
Syntax
cdp log mismatch native
no cdp log mismatch native
Parameters
N/A
Default Configuration
The switch reports Native VLAN mismatches from all ports.
Command Mode
Global Configuration mode, Ethernet Interface
Example
console(conf) interface gi1
45
688