Macro Auto User Smartport Macro; Macro Auto Processing Type - Cisco Small Business 300 1.1 Series Administration Manual

Smartport Commands
78-20269-01 Command Line Interface Reference Guide
Example 2 - In this example, automatic detection of wireless access points (ap) is
enabled.
console(config)#macro auto processing type ?
host
ip_phone
ip_phone_desktop
switch
router
ap
console(config)#macro auto processing type ap enabled

43.10 macro auto user smartport macro

The macro auto user smartport macro Global Configuration mode command links
user-defined Smartport macros to a Smartport type. This is done by replacing the
link to the built-in macro with the link to the user-defined macro. The no format of
the command returns the link to the default built-in Smartport macro.
Syntax
macro auto user smartport macro
parameter-name value
[
no macro auto user smartport macro
Parameters
•
smartport macro
guest, server, host, ip_camera, ip_phone, ip_phone_desktop, switch, router
or wireless access point (ap)).
•
smartport macro
macro name that replaces the built-in Smartport macro.
•
parameter-name value
user-defined macro.
set type to host
set type to ip_phone
set type to ip_phone_desktop
set type to switch
set type to router
set type to access point
smartport-type user-defined-macro-name
parameter-name value
[
smartport-type
smartport-type
—Smartport type (range: printer, desktop,
user-defined-macro-name
—Specifies the parameter name and its value in the
parameter name value
[ -
—Specifies the user-defined
43
]]]
639