Ipv6 Mld Query-Max-Response-Time - Cisco Small Business 300 1.1 Series Administration Manual

IPv6 MLD Snooping Commands
78-20269-01 Command Line Interface Reference Guide
Syntax
ipv6 mld query-interval
ipv6 mld query-interval
Parameters
seconds—Frequency, in seconds, at which MLD query messages are sent on the
interface. (Range: 30–18000)
Default Configuration
125
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
You can execute the command before the VLAN is created.
Example
console(config)# interface vlan 1
console(config-if)# ipv6 mld query-interval 3000
32.9

ipv6 mld query-max-response-time

Use the ipv6 mld query-max-response-time Interface Configuration mode
command to configure the Query Maximum Response time. Use the no format of
the command to return to default.
Syntax
ipv6 mld query-max-response-time
no ipv6 mld query-max-response-time
Parameter
seconds—Maximum response time, in seconds, advertised in MLD queries.
(Range: 5–20)
seconds
seconds
32
457