Table of Contents
Advertisement
Quality of Service (QoS) Commands
78-20269-01 Command Line Interface Reference Guide
Example
Console>
show qos wrr-queue wrtd
Weighted Random Tail Drop is disabled
Weighted Random Tail Drop will be enabled after reset
41.26 show qos interface
Use the show qos interface EXEC mode command to display Quality of Service
(QoS) information on the interface.
Syntax
buffers | queueing | policers | shapers | rate-limit] [interface-id]
show qos interface [
Parameters
•
buffers—Displays the buffer settings for the interface's queues. For GE
ports, displays the queue depth for each of the 4 queues.
•
queueing—Displays the queue's strategy (WRR or EF), the weight for WRR
queues, the CoS to queue map and the EF priority.
•
policers—Displays all the policers configured for this interface, their
settings, and the number of policers currently unused (on a VLAN).
•
shapers—Displays the shaper of the specified interface and the shaper for
the queue on the specified interface.
•
rate-limit—Displays the rate-limit configuration.
•
interface-id—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port, or Port-channel.
Default Configuration
N/A
Command Mode
EXEC mode
41
583
Advertisement
Table of Contents
