Virtual Local Area Network (VLAN) Commands
78-20269-01 Command Line Interface Reference Guide
Port Mode: Access
Gvrp Status: disabled
Ingress Filtering: true
Acceptable Frame Type: admitAll
Ingress UnTagged VLAN ( NATIVE ): 1
Port is member in:
Vlan
Name
---- -------------------------------- ----------- --------------------
1
1
Forbidden VLANS:
Vlan
Name
---- --------------------------------
Classification rules:
Mac based VLANs:
30.27 ip internal-usage-vlan
The system assigns a VLAN to every IP address. In rare cases, this might conflict
with a user requirement for that VLAN. In this case, use the ip internal-usage-vlan
Interface Configuration (Ethernet, Port-channel) mode command to reserve a
different VLAN as the internal usage VLAN of an interface. Use the no form of this
command to restore the default configuration.
Syntax
ip internal-usage-vlan
no ip internal-usage-vlan
Parameters
vlan-id—Specifies the internal usage VLAN ID.
Egress Rule Port Membership Type
Untagged
vlan-id
30
System
432