Show Interfaces Status - Cisco Small Business 300 1.1 Series Administration Manual

Ethernet Configuration Commands
78-20269-01 Command Line Interface Reference Guide
Port Type Duplex
------ --------- ------
gi1 1G-Copper Full
gi2 1G-Copper Full
PO Type Speed
------ ------ -----
Po1

21.15 show interfaces status

Use the show interfaces status EXEC mode command to display the status of all
configured interfaces or of a specific interface.
Syntax
show interfaces status
Parameters
interface-id—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or Port-channel.
detailed—Displays information for non-present ports in addition to present ports.
Command Mode
EXEC mode
Example
The following example displays the status of all configured interfaces.
console# show interfaces status
Flow
Speed Neg control
----- -------- -------
10000 Disabled Off
1000 Disabled Off
Flow
Neg Control
-------- -------
Disabled Off
[interface-id] [detailed]
Flow
Admin Back
State Pressure
----- --------
Up Disabled
Up Disabled
Admin
State
-----
Up
Link Back Mdix
21
Mdix
Mode
----
Off
Off
284