Passwords Complexity <Attributes - Cisco Small Business 300 1.1 Series Administration Manual

Authentication, Authorization and Accounting (AAA) Commands
78-20269-01 Command Line Interface Reference Guide
Example
The following example configures requiring complex passwords that fulfill the
minimum requirements specified in the User Guidelines above.
console(config)#
passwords complexity enable
console#show passwords configuration
Passwords aging is enabled with aging time 180 days.
Passwords complexity is enabled with the following attributes:
Minimal length: 3 characters
Minimal classes: 3
New password must be different than the current: Enabled
Maximum consecutive same characters: 3
New password must be different than the user name: Enabled
New password must be different than the manufacturer name: Enabled
switchcc293e#
15.10 passwords complexity <attributes>
Use the passwords complexity <attributes> Global Configuration mode
commands to control the minimum requirements from a password when
password complexity is enabled. Use the no form of these commands to return to
default.
Syntax
passwords complexity
no passwords complexity
passwords complexity
no passwords complexity
passwords complexity
no passwords complexity
passwords complexity
no password complexity
min-length number
min-length
min-classes number
min-classes
not-current
not-current
no-repeat number
no-repeat
15
200