Rmon Collection Stats - Cisco Small Business 300 1.1 Series Administration Manual

Managed switch
Table of Contents

Advertisement

Remote Network Monitoring (RMON) Commands
78-20269-01 Command Line Interface Reference Guide
Field
Description
Fragments
The total number of packets received, less than
64 octets in length (excluding framing bits but
including FCS octets) and either a bad Frame
Check Sequence (FCS) with an integral number
of octets (FCS Error) or a bad FCS with a
non-integral number of octets (Alignment Error).
Jabbers
The total number of packets received, longer
than 1518 octets (excluding framing bits, but
including FCS octets), and either a bad Frame
Check Sequence (FCS) with an integral number
of octets (FCS Error) or a bad FCS with a
non-integral number of octets (Alignment Error).
64 Octets
The total number of packets (including bad
packets) received that are 64 octets in length
(excluding framing bits but including FCS
octets).
65 to 127 Octets
The total number of packets (including bad
packets) received that are between 65 and 127
octets in length inclusive (excluding framing bits
but including FCS octets).
128 to 255
The total number of packets (including bad
Octets
packets) received that are between 128 and
255 octets in length inclusive (excluding framing
bits but including FCS octets).
256 to 511
The total number of packets (including bad
Octets
packets) received that are between 256 and
511 octets in length inclusive (excluding framing
bits but including FCS octets).
512 to 1023
The total number of packets (including bad
Octets
packets) received that were between 512 and
1023 octets in length inclusive (excluding
framing bits but including FCS octets).
1024 to max
The total number of packets (including bad
packets) received that were between 1024
octets and the maximum frame size in length
inclusive (excluding framing bits but including
FCS octets).
19.2

rmon collection stats

Use the rmon collection stats Interface Configuration mode command to enable
Remote Monitoring (RMON) MIB history group of statistics on an interface. Use the
no form of this command to remove a specified RMON history group of statistics.
19
234

Advertisement

Table of Contents
loading

Table of Contents