Ipv6 Mld Last-Member-Query-Count - Cisco Small Business 300 1.1 Series Administration Manual

IPv6 MLD Snooping Commands
78-20269-01 Command Line Interface Reference Guide
Default Configuration
10
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
You can execute the command before the VLAN is created.
Example
console(config)# interface vlan 1
console(config-if)# ipv6 mld query-max-response-time 5

32.10 ipv6 mld last-member-query-count

Use the ipv6 mld last-member-query-count Interface Configuration mode
command to configure the Last Member Query Counter. Use the no format of the
command to return to default.
Syntax
ipv6 mld last-member-query-count
no ipv6 mld last-member-query-count
Parameters
count—The number of times that group- or group-source-specific queries are sent
upon receipt of message indicating a leave. (Range: 1–7)
Default Configuration
A value of Robustness variable
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
You can execute the command before the VLAN is created.
count
32
458