Show Sntp Status - Cisco Small Business 300 1.1 Series Administration Manual

Clock Commands
78-20269-01 Command Line Interface Reference Guide
Default Configuration
N/A
Command Mode
Privileged EXEC mode
Example
The following example displays the device's current SNTP configuration.
console# show sntp configuration
SNTP port : 123 .
Polling interval: 1024 seconds.
No MD5 authentication keys.
Authentication is not required for synchronization.
No trusted keys.
Unicast Clients: Enabled
Unicast Clients Polling: Enabled
Server
----------------------------- ---------- --------------
1.1.1.121
Broadcast Clients: disabled
Anycast Clients: disabled
No Broadcast Interfaces.
console#
6.14

show sntp status

The show sntp status Privileged EXEC mode command displays the Simple
Network Time Protocol (SNTP) servers status.
Syntax
show sntp status
Polling Encryption Key
Disabled Disabled
6
112