Show Crypto Key Pubkey-Chain Ssh - Cisco Small Business 300 1.1 Series Administration Manual

Teletype Network (Telnet), Secure Shell (SSH) and Secure Login (Slogin) Commands
78-20269-01 Command Line Interface Reference Guide
Vu4GRfpSwoQUvV35LqJJk67IOU/zfwOl1g
kTwml75QR9gHujS6KwGN2QWXgh3ub8gDjTSq
muSn/Wd05iDX2IExQWu08licglk02LYciz
+Z4TrEU/9FJxwPiVQOjc+KBXuR0juNg5nFYsY
0ZCk0N/W9a/tnkm1shRE7Di71+w3fNiOA
6w9o44t6+AINEICBCCA4YcF6zMzaT1wefWwX6f+
Rmt5nhhqdAtN/4oJfce166DqVX1gWmN
zNR4DYDvSzg0lDnwCAC8Qh
Fingerprint: a4:16:46:23:5a:8d:1d:b5:37:59:eb:44:13:b9:33:e9
12.6

show crypto key pubkey-chain ssh

The show crypto key pubkey-chain ssh Privileged EXEC mode command displays
SSH public keys stored on the device.
Syntax
show crypto key pubkey-chain ssh
{bubble-babble | hex}
Parameters
•
username
username
1–48 characters)
•
fingerprint {bubble-babble | hex}—Specifies the fingerprint display format.
The possible values are:
-
bubble-babble—Specifies that the fingerprint is displayed in Bubble
Babble format.
-
hex—Specifies that the fingerprint is displayed in hexadecimal format.
Default Configuration
The default fingerprint format is hexadecimal.
[username username] [fingerprint
]
—Specifies the remote SSH client username. (Length:
12
177