Qos Statistics Queues - Cisco Small Business 300 1.1 Series Administration Manual

Quality of Service (QoS) Commands
78-20269-01 Command Line Interface Reference Guide
Parameters
aggregate-policer-name—Specifies the aggregate policer name.
Default Configuration
Counting in-profile and out-of-profile is disabled.
Command Mode
Global Configuration mode
Example
The following example enables counting in-profile and out-of-profile on the
interface.
Console(config)#
qos statistics aggregate-policer

41.41 qos statistics queues

Use the qos statistics queues Global Configuration mode command to enable
QoS statistics for output queues. Use the no form of this command to disable QoS
statistics for output queues.
Syntax
qos statistics queues
no qos statistics queues
Parameters
•
set—Specifies the counter set number.
•
interface—Specifies the Ethernet port.
•
queue—Specifies the output queue number.
•
dp—Specifies the drop precedence. The available values are: high, low.
Default Configuration
Set 1: All interfaces, all queues, high DP.
Set 2: All interfaces, all queues, low DP.
set {queue | all} {dp | all} {interface | all}
set
41
policer1
597