Show Ipv6 Tunnel - Cisco Small Business 300 1.1 Series Administration Manual

Tunnel Commands
78-20269-01 Command Line Interface Reference Guide
The router solicitation interval (when there is an active ISATAP router) is the
minimum-router-lifetime that is received from the ISATAP router, divided by
(Robustness + 1).
Example
The following example sets the number of DNS query/router solicitation refresh
messages that the device sends to 5.
Console(config)#
tunnel isatap robustness
37.8

show ipv6 tunnel

Use the show ïpv6 tunnel EXEC mode command to display information on the
ISATAP tunnel.
Syntax
show ïpv6 tunnel
Command Mode
EXEC mode
Example
The following example displays information on the ISATAP tunnel.
Console>
show ipv6 tunnel
Tunnel 1
--------
Tunnel status
Tunnel protocol
Tunnel Local address type
Tunnel Local Ipv4 address
Router DNS name
Router IPv4 address
5
: DOWN
: NONE
: auto
: 0.0.0.0
: ISATAP
: 0.0.0.0
37
522