Show (Mst) - Cisco Small Business 300 1.1 Series Administration Manual

Spanning-Tree Commands
78-20269-01 Command Line Interface Reference Guide
Parameters
value—Specifies the MST configuration revision number. (Range: 0–65535)
Default Configuration
The default configuration revision number is 0.
Command Mode
MST Configuration mode
Example
The following example sets the configuration revision to 1.
Console(config) # spanning-tree mst configuration
Console(config-mst) #

29.25 show (MST)

Use the show MST Configuration mode command to displays the current or
pending MST region configuration.
Syntax
{current | pending}
show
Parameters
•
current—Displays the current MST region configuration.
•
pending—Displays the pending MST region configuration.
Command Mode
MST Configuration mode
1
revision
29
383