Tacacs-Server Source-Ip; Show Tacacs - Cisco Small Business 300 1.1 Series Administration Manual

Terminal Access Controller Access-Control System Plus (TACACS+) Commands
78-20269-01 Command Line Interface Reference Guide
17.4

tacacs-server source-ip

Use the tacacs-server source-ip Global Configuration mode command to
configure the source IP address to be used for communication with TACACS+
servers. Use the no form of this command to restore the default configuration.
Syntax
tacacs-server source-ip {
no tacacs-server source-ip {
Parameters
source—Specifies the source IP address. (Range: Valid IP address)
Default Configuration
The default source IP address is the outgoing IP interface address.
Command Mode
Global Configuration mode
User Guidelines
If the configured IP source address has no available IP interface, an error message
is issued when attempting to communicate with the IP address.
Example
The following example specifies the source IP address for all TACACS+ servers.
Console(config)# tacacs-server source-ip
17.5

show tacacs

Use the show tacacs Privileged EXEC mode command to display configuration
and statistical information for a TACACS+ server.
Syntax
ip-address
show tacacs [
source
}
source
}
172.16.8.1
]
17
217