Interface Ip - Cisco Small Business 300 1.1 Series Administration Manual

Managed switch
Table of Contents

Advertisement

IP Addressing Commands
78-20269-01 Command Line Interface Reference Guide
g2:
ARP Proxy: disabled
ARP timeout:60000 Seconds
VLAN 1:
ARP Proxy: enabled
ARP timeout:70000 Seconds
VLAN 2:
ARP Proxy: enabled
ARP timeout:80000 Second (Global)

35.13 interface ip

Use the interface ip Global Configuration mode command to enter the IP Interface
Configuration mode.
Syntax
-address
interface ip
Parameters
ip-address—Specifies one of the IP addresses of the device.
Command Mode
Global Configuration mode
User Guidelines
To use this command, you must put the switch into routing mode using the set
system mode router command.
Example
The following example enters the IP interface configuration mode.
Console (config)#
interface ip
192.168.1.1
35
489

Advertisement

Table of Contents
loading

Table of Contents