Cisco Small Business 300 1.1 Series Administration Manual page 667

Link Layer Discovery Protocol (LLDP) Commands
78-20269-01 Command Line Interface Reference Guide
Default Configuration
If no port ID is entered, the command displays information for all ports.
Command Mode
Privileged EXEC mode
Examples
Example 1 - The following example displays the LLDP MED configuration for all
interfaces.
console# show lldp med configuration
Fast Start Repeat Count: 4.
lldp med network-policy voice: manual
Network policy 1
-------------------
Application type: voiceSignaling
VLAN ID: 1 untagged
Layer 2 priority: 0
DSCP: 0
Port Capabilities
------ -------------- -------------- ---------- -------------
gi1 Yes
gi2 Yes
gi3 No
Example 2 - The following example displays the LLDP MED configuration for gi1.
console# show lldp med configuration gi1
Port Capabilities
------- -------------- ---------------- --------- ----------
gi1 Yes
Network Policy Location
Yes Yes
Yes No
No No
Network Policy Location
Yes Yes
Notifications Inventory
--------
Enabled Yes
Enabled No
Enabled No
Notifications Inventory
--------
Enabled Yes
44
669