Clear Spanning-Tree Detected-Protocols; Spanning-Tree Mst Priority - Cisco Small Business 300 1.1 Series Administration Manual

Spanning-Tree Commands
78-20269-01 Command Line Interface Reference Guide
Console(config-if)#

29.16 clear spanning-tree detected-protocols

Use the clear spanning-tree detected-protocols Privileged EXEC command to
restart the protocol migration process (force the renegotiation with neighboring
switches) on all interfaces or on the specified interface
Syntax
clear spanning-tree detected-protocols
Parameters
interface-id—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or Port-channel.
Command Mode
Privileged EXEC mode
User Guidelines
This feature should be used only when working in RSTP or MSTP mode.
Example
console# clear spanning-tree detected-protocols

29.17 spanning-tree mst priority

Use the spanning-tree mst priority Global Configuration mode command to
configure the device priority for the specified spanning-tree instance. Use the no
form of this command to restore the default configuration.
Syntax
spanning-tree mst instance-id priority priority
no spanning-tree mst
Parameters
•
instance-id—Specifies the spanning-tree instance ID. (Range:1–7)
spanning-tree bpduguard enable
[interface interface-id]
instance-id priority
29
376