Show Interfaces - Cisco Catalyst 3650 series Command Reference Manual

show interfaces

To display the administrative and operational status of all interfaces or for a specified interface, use the show
interfaces command in privileged EXEC mode.
show interfaces [interface-id| vlan vlan-id] [accounting| capabilities [module number]| debounce|
description| etherchannel| flowcontrol| private-vlan mapping| pruning| stats| status [err-disabled]| trunk]
Syntax Description
interface-id
vlan vlan-id
accounting
capabilities
module number
description
etherchannel
flowcontrol
private-vlan mapping
pruning
stats
status
(Optional) ID of the interface. Valid interfaces include physical
ports (including type, stack member for stacking-capable switches,
module, and port number) and port channels. The port channel
range is 1 to 48.
(Optional) VLAN identification. The range is 1 to 4094.
(Optional) Displays accounting information on the interface,
including active protocols and input and output packets and octets.
The display shows only packets processed in software;
Note
hardware-switched packets do not appear.
(Optional) Displays the capabilities of all interfaces or the specified
interface, including the features and options that you can configure
on the interface. Though visible in the command line help, this
option is not available for VLAN IDs.
(Optional) Displays capabilities of all interfaces on the switch or
specified stack member.
This option is not available if you entered a specific interface ID.
(Optional) Displays the administrative status and description set
for an interface.
(Optional) Displays interface EtherChannel information.
(Optional) Displays interface flow control information.
(Optional) Displays private-VLAN mapping information for the
VLAN switch virtual interfaces (SVIs). This keyword is not
available if the switch is running the LAN base feature set.
(Optional) Displays trunk VTP pruning information for the
interface.
(Optional) Displays the input and output packets by switching the
path for the interface.
(Optional) Displays the status of the interface. A status of
unsupported in the Type field means that a non-Cisco small
form-factor pluggable (SFP) module is inserted in the module slot.
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
show interfaces
77