Show Interfaces - Cisco ME 3800X Command Reference Manual

show interfaces

show interfaces
To display the administrative and operational status of all interfaces or a specified interface, use the show
interfaces command in privileged EXEC mode.
Syntax Description
interface-id
vlan vlan-id
accounting
capabilities
module number
counters
dampening
debounce
[module]
description
etherchannel
fcpa
flowcontrol
mpls-exp
rep
stats
status
err-disabled
switchport
backup
module
transceivers
trunk
Cisco ME 3800X and ME 3600X Switch Command Reference
-64
show interfaces [interface-id | vlan vlan-id] [accounting | capabilities [module number] |
counters | dampening | debounce [module] | description | etherchannel | flowcontrol | rep |
stats | status [err-disabled] | switchport [backup | module number] | transceivers
[properties | detail] [module number] | trunk] [ | {begin | exclude | include} expression]
(Optional) Valid interfaces include physical ports (including type, module, and
port number) and port channels. The port-channel range is 1 to 48.
(Optional) VLAN identification. The range is 1 to 4094.
(Optional) Displays accounting information on the interface, including active
protocols and input and output packets and octets.
(Optional) Displays the capabilities of all interfaces or the specified interface,
including the features and options that you can configure on the interface. Though
visible in the command line help, this option is not available for VLAN IDs.
(Optional) Displays capabilities, switchport configuration, or transceiver
characteristics (depending on preceding keyword) of all interfaces on the switch.
The only valid module number is 1. This option is not available if you have entered
a specific interface ID.
(Optional) See the
(Optional) Displays interface dampening information.
(Optional) Displays interface debounce time information.
(Optional) Displays the administrative status and description set for an interface.
(Optional) Displays interface EtherChannel information.
(Optional) Displays fiber channel information
(Optional) Displays interface flowcontrol information
(Optional) Display interface MPLS experimental accounting information.
(Optional) See the
(Optional) Displays the input and output packets by switching path for the
interface.
(Optional) Displays the status of the interface. A status of unsupported in the Type
field means that a non-Cisco small form-factor pluggable (SFP) module is inserted
in the module slot.
(Optional) Displays interfaces in error-disabled state.
(Optional) Displays the administrative and operational status of a switching
(nonrouting) port, including port blocking and port protection settings.
(Optional) Displays the backup interface configuration.
(Optional) Limits the display to interfaces on a module
(Optional) See the
Displays interface trunk information. If you do not specify an interface, only
information for active trunking ports appears.
show interfaces counters
show interfaces rep command.
show interfaces transceiver
command.
command.
OL-28238-01
Chapter