Show Mac Address-Table - Cisco Catalyst 3550 Command Reference Manual

Chapter 2 Cisco IOS Commands

show mac address-table

Use the show mac address-table user EXEC command with no keywords to display the MAC address
table static and dynamic entries.
Note Beginning with Cisco IOS Release 12.1(11)EA1, the show mac address-table command replaces the
show mac-address-table command (with the hyphen).
Syntax Description
| begin
| exclude
| include
expression
Command Modes
User EXEC
Command History Release
12.1(4)EA1
12.1(11)EA1
Usage Guidelines
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show mac address-table command:
Switch> show mac address-table
------------------------------------------
Vlan
----
All
All
All
All
All
All
All
All
All
1
Total Mac Addresses for this criterion: 9
78-11195-09
show mac address-table [ | {begin | exclude | include} expression]
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was first introduced.
The show mac-address-table command was replaced by the show mac
address-table command.
Mac Address Table
Mac Address Type
----------- ----
0000.0000.0001 STATIC
0000.0000.0002 STATIC
0000.0000.0003 STATIC
0000.0000.0009 STATIC
0000.0000.0012 STATIC
0180.c200.000b STATIC
0180.c200.000c STATIC
0180.c200.000d STATIC
0180.c200.0010 STATIC
0030.9441.6327 DYNAMIC
Ports
-----
CPU
CPU
CPU
CPU
CPU
CPU
CPU
CPU
CPU
Fa0/23
Catalyst 3550 Multilayer Switch Command Reference
show mac address-table
2-305