Show Mac Address-Table - Cisco Catalyst 3560-X Command Reference Manual

\show mac address-table

show mac address-table
\
Syntax Description
Command Modes
Command History
Usage Guidelines
Examples
Catalyst 3750-X and 3560-X Switch Command Reference
2-668
Downloaded from www.Manualslib.com
Use the show mac address-table user EXEC command to display a specific MAC address table static
and dynamic entry or the MAC address table static and dynamic entries on a specific interface or VLAN.
show mac address-table [ | {begin | exclude | include} expression]
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
User EXEC
Release Modification
12.2(53)SE2 This command was introduced.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
This is an example of output from the show mac address-table command:
Switch> show mac address-table
Mac Address Table
------------------------------------------
Vlan Mac Address
---- -----------
All 0000.0000.0001
All 0000.0000.0002
All 0000.0000.0003
All 0000.0000.0009
All 0000.0000.0012
All 0180.c200.000b
All 0180.c200.000c
All 0180.c200.000d
All 0180.c200.000e
All 0180.c200.000f
All 0180.c200.0010
1 0030.9441.6327
Total Mac Addresses for this criterion: 12
manuals search engine
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
Type Ports
---- -----
STATIC CPU
STATIC CPU
STATIC CPU
STATIC CPU
STATIC CPU
STATIC CPU
STATIC CPU
STATIC CPU
STATIC CPU
STATIC CPU
STATIC CPU
DYNAMIC Gi6/0/4
OL-21522-02