Show Rmon - Cisco Nexus 3548 Command Reference Manual

show rmon

show rmon
To display information about Remote Monitoring (RMON) alarms or high-capacity alarms or events, use
the show rmon command.
Syntax Description alarms
events
hcalarms
info
logs
Command Default
None
Command Modes
EXEC mode
Command History Release
5.0(3)A1(1)
Examples
This example shows how to display the RMON high-capacity alarms configured on the switch:
switch# show rmon hclarms
High Capacity Alarm 3 is active, owned by admin
Monitors 1.3.6.1.2.1.2.2.1.17.83886080 every 5 second(s)
Taking delta samples, last value was 216340
Rising threshold is 0, assigned to event 3
Falling threshold is 0, assigned to event 0
On startup enable rising alarm
Number of Failed Attempts is 0
switch#
This example shows how to display the RMON events configured on the switch:
switch# show rmon events
Event 5 is active, owned by admin
Description is myRMONEvent
Event firing causes nothing, last fired never
switch#
This example shows how to display the RMON configuration information:
switch# show rmon info
Maximum allowed 32 bit or 64 bit alarms : 512
Number of 32 bit alarms configured : 0
Number of 64 bit hcalarms configured : 1
switch#
Cisco Nexus 3548 Switch NX-OS System Management Command Reference
176
show rmon {alarms | events | hcalarms | info | logs}
Displays the RMON alarms.
Displays the RMON events.
Displays the RMON high-capacity alarms.
Displays the RMON configuration information.
Displays information about the RMON event logs.
Modification
This command was introduced.
System Management Commands
OL-27851-02