Show Table-Map - Cisco Nexus 7000 Series Command Reference Manual

Cisco Nexus 7000 Series NX-OS Quality of Service Commands
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .

show table-map

To display table maps, use the show table-map command.
Syntax Description
table-map-name
default-table-map-name
Defaults None
Command Modes Global configuration
Supported User Roles
network-admin
vdc-admin
Command History Release
4.0
4.0.2
Usage Guidelines For a list of the system-defined table maps, see
In Cisco NX-OS Release 4.0.2 and later releases, the display shows only one of the following:
•
•
This command does not require a license.
Examples In the Cisco NX-OS Release 4.0.2 and later releases, the following example shows how to display a
system-defined table map:
switch(config-pmap-c-qos)# show table-map cos-dscp-map
Table-map cos-dscp-map
This example shows how to display a system-defined table map:
switch(config)# show table-map cos-dscp-map
Table-map cos-dscp-map
OL-23378-01
show table-map [table-map-name | default-table-map-name]
(Optional) User-defined named table map.
(Optional) System-defined default table map.
Modification
This command was introduced.
Display was changed
The default copy if you have not configured any changes to the table map.
The changes you configured to the table map.
default copy
from 0 to 0
from 1 to 1
from 2 to 2
Cisco Nexus 7000 Series NX-OS Quality of Service Command Reference, Release 5.x
Table 5.
show table-map
QOS-119