Adding A Unicast Sntp Server - Cisco 300 Series Administration Manual

Administration: Time Settings
Configuring System Time
STEP 3
NOTE
STEP 1
STEP 2
Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version)
- From—Day and time that DST starts.
- To—Day and time that DST ends.
Recurring
Selecting
DST:
• From—Date when DST begins each year.
Day
- —Day of the week on which DST begins every year.
Week
- —Week within the month from which DST begins every year.
- Month —Month of the year in which DST begins every year.
Time
- —The time at which DST begins every year.
• To—Date when DST ends each year. For example, DST ends locally every
fourth Friday in October at 5:00 am. The parameters are:
Day
- —Day of the week on which DST ends every year.
Week
- —Week within the month from which DST ends every year.
Month
- —Month of the year in which DST ends every year.
Time
- —The time at which DST ends every year.
Click Apply. The system time values are written to the Running Configuration file.

Adding a Unicast SNTP Server

Up to 16 Unicast SNTP servers can be configured.
To specify a Unicast SNTP server by name, you must first configure DNS server(s)
on the device (see DNS
box to enable SNTP Client Unicast.
To add a Unicast SNTP server:
Click Administration > Time Settings > SNTP Unicast.
Enter the following fields:
• SNTP Client Unicast—Select to enable the device to use SNTP-predefined
Unicast clients with Unicast SNTP servers.
allows different customization of the start and stop of
Settings). In order to add a Unicast SNTP server, check the
6
77