Enable A Client Vlan - Cisco Catalyst 3850 Manual

Converged Wired and Wireless Access
interface
description
switchport host
switchport access vlan
switchport port-security maximum
switchport port-security
switchport port-security aging time
switchport port-security aging type inactivity
switchport port-security violation restrict
ip
switchport block unicast
storm-control broadcast level pps
storm-control multicast level pps
storm-control action trap

Enable a Client VLAN

Step 10 Configure an external server to allocate IP addresses for clients. Define a client VLAN and activate the
VLAN in the database.
Every WLAN profile must be associated with a client VLAN.
!Activate the client VLAN in the VLAN database.
!Configure VLAN 200 if not already configured.
!
vlan
name
end
!
interface vlan
description Client VLAN
ip address
no shutdown
end
GigabitEthernet1/0/3
Lightweight Access Point
snooping limit rate
200
Wireless_Client
200
192.168.13.2 255.255.254.0
Best Practice User Guide for the Catalyst 3850 and Catalyst 3650 Switch Series
12
11
2
100
1k
2k
Enable the Switch as a Wireless Controller
89