Adding A Unicast Sntp Server - Cisco SF500-24 Administration Manual

7
STEP 3
NOTE
STEP 1
105
- From—Day and time that DST starts.
- To—Day and time that DST ends.
Recurring
Selecting
DST:
• From—Date when DST begins each year.
Day
- —Day of the week on which DST begins every year.
Week
- —Week within the month from which DST begins every year.
- Month —Month of the year in which DST begins every year.
Time
- —The time at which DST begins every year.
• To—Date when DST ends each year. For example, DST ends locally every
fourth Friday in October at 5:00 am. The parameters are:
Day
- —Day of the week on which DST ends every year.
Week
- —Week within the month from which DST ends every year.
Month
- —Month of the year in which DST ends every year.
Time
- —The time at which DST ends every year.
Click Apply. The system time values are written to the Running Configuration file.

Adding a Unicast SNTP Server

Up to 16 Unicast SNTP servers can be configured.
To specify a Unicast SNTP server by name, you must first configure DNS server(s)
on the device (see DNS
box to enable SNTP Client Unicast.
To add a Unicast SNTP server:
Click Administration > Time Settings > SNTP Unicast.
This page contains the following information for each Unicast SNTP server:
• SNTP Server—SNTP server IP address. The preferred server, or hostname,
is chosen according to its stratum level.
Cisco 500 Series Stackable Managed Switch Administration Guide Release 1.3
allows different customization of the start and stop of
Settings). In order to add a Unicast SNTP server, check the
Administration: Time Settings
Configuring System Time