Sntp Broadcast Client Enable - Cisco 300 Series Cli Manual
Small business 300 series managed switches
command line interface guide release 1.3
Hide thumbs
Also See for 300 Series:
- Cli manual (1117 pages) ,
- Administration manual (586 pages) ,
- Quick start manual (72 pages)
Table of Contents
Advertisement
7
Clock Commands
Default Configuration
No keys are trusted.
Command Mode
Global Configuration mode
User Guidelines
The command is relevant for both received unicast and broadcast.
Examples
The following example authenticates key 8.
switchxxxxxx(config)#
sntp trusted-key
8
switchxxxxxx(config)# sntp authentication-key 8 md5 ClkKey
switchxxxxxx(config)# sntp trusted-key 8
switchxxxxxx(config)# sntp authenticate
7.9
sntp broadcast client enable
The sntp broadcast client enable Global Configuration mode command enables
SNTP Broadcast clients. Use the no form of this command to disable SNTP
Broadcast clients.
Syntax
sntp broadcast client enable
no sntp broadcast client enable
Default Configuration
The SNTP Broadcast client is disabled.
Command Mode
Global Configuration mode
142
78-21075-01 Command Line Interface Reference Guide
Advertisement
Table of Contents
