Mitsubishi Electric GOT2000 Series User Manual page 590

(1) LED status
Item
[RUN]
[PC]
[ONLINE]
[TEST]
[OFFLINE]
[M/S.ERR]
[MANAGER]
[S.MANAGER]
[NORMAL]
[PARAM.ERR]
[F LOOP ERR]
[SD]
[RD]
[TOKEN PASS]
[DATA LINK]
[GOT R/W]
[R LOOP ERR]
*1
(2) Loop information
Item
[IN: Loop Sts.]
[IN: LoopBK Sta]
[IN: LoopBK factor]
[OUT: Loop Sts.]
[OUT: LoopBK Sta]
21 - 4
21.4 Display Contents
LED
*1
color
Operating normally
CC-Link IE Controller
Network established
Green
Online mode
Test mode
Offline mode
Duplicate control station or
Red
station No. detected
Control station in operation
Sub-control station in
Green
operation
Normal station in operation
Parameter error detected
Red
IN-side error detected
Data being sent
Data being received
Baton pass being executed
Data link being executed
(Cyclic transmission in
progress)
Green
Red OUT-side error detected
The monochrome display shows the LED statuses as follows:
• Lit: ■
• Not lit: □
Displays the connection status of the host station on the IN side.
• [Normal]
• [Rev connect]
Displays the station number of the IN-side loopback station.
• No loopback executing station: [---]
• Station No.: [1] to [120]
Displays the cause of the loopback.
• [No LoopBK Sta.]
• [OUT: cable disconnection]
• [OUT: connecting a line]
• [OUT: wrong cable connection]
Displays the connection status of the host station on the OUT side.
• [Normal]
• [Rev connect]
Displays the number of the station that is executing a loopback on the OUT side.
• No loopback executing station: [---]
• Station No.: [1] to [120]
Lit
Hardware failure or WDT
error
CC-Link IE Controller
Network not established
Other than online mode
Other than test mode
Other than offline mode
Not detected
Other than control station
Other than sub-control station
Other than normal station
Not detected
Data not sent
Data not received?
Baton pass not executed
Data link not executed
• Hardware test in progress
• Offline
• Self-loopback test in
progress
• Internal self-loopback test
in progress
• Station-to-station test in
progress
Not detected
Not lit
Communication error in a
station, or station numbers
duplicated
Data link being executed
(Cyclic transmission stopped)
• Online
• Line test in progress
Description
Blink
-
-
-
-