Mitsubishi Electric GOT2000 Series User Manual page 105

Step 4.
Copy a comment file (.wcd) in the saved project.
When the GX Works2 project is used, the creation method of a comment file (.wcd) differs depending on
whether the project used can be or cannot be saved in the GX Developer format.
• Project that can be saved in the GX Developer format
A comment file (.wcd) is created when the project is saved in the GX Developer format.
• Project that cannot be saved in the GX Developer format
Export the project by using [Write IC Memory Card] of GX Works2, and change the extension of the
comment file from [.qcd] to [.wcd].
Step 5.
Store the copied comment files in the folders for each character code in the data storage.
Example: Storing comment files with ASCII code in the ASCII folder.
Step 6.
Install the data storage with the comment file on the GOT.
Switch comment files on the Ladder monitor screen for displaying the comments in appropriate language.
POINT POINT POINT
Restrictions on using comment files
If the comments of a comment file stored in the data storage are displayed, the comments that
are assigned to the bits of word devices cannot be displayed.
4.3 Display Operation
4
4 - 17