Mitsubishi Electric GOT2000 Series User Manual page 275

■1. Communication setting window
(1) Displayed screen
(When the CH No. is input)
1) CH No. input area
Set the CH No. for the target controller.
The setting range is [1] to [4].
2) Network No. input area
Set the network No. for the target controller.
The setting range differs according to the connection type.
• Bus connection, direct CPU connection, and serial communication connection: [0]
• Ethernet connection, CC-Link IE Controller Network connection, CC-Link IE Field Network connection: [1] to
[239]
• MELSECNET/H, MELSECNET/10: [0] (Host loop) or [1] to [255] (Specified loop)
• CC-Link (ID/G4) connection: [0]
3) Station No. input area
Set the station No. of the target controller.
When the station No. is set to the host station (FF), set the network No. to 0.
The setting range differs according to the connection type.
• Bus connection, direct CPU connection, and serial communication connection: [FF] (Host station)
• Ethernet connection: [1] to [64]
• MELSECNET/H and MELSECNET/10: [0] (Control station) or [1] to [64] (Normal station)
• CC-Link IE Controller Network connection: [1] to [120]
• CC-Link IE Field Network connection: [0] (Master station), [1] to [120] (Local station)
• CC-Link (ID/G4) connection: [0] (Master station) or [1] to [64] (Local station)
4) CH No. selection key
Set the CPU No.
5) Touch key
The keys used for the operations in the communication setting window.
(2) Key functions
1) [×] key
Closes the communication setting window.
When any of the CH No., network No., station No., and CPU No. is not input and the monitor target is not set,
the communication setting window does not close.
2) Input area movement key
Moves the cursor among the input areas.
1) 3) 2)
1)
(When the CH No. is input)
8.4 Operation of Each Intelligent Module Monitor Screen
3) 1)
4)
(When the network No., station No.,
and CPU No. are input)
2)
3)
(When the network No., station No.,
and CPU No. are input)
2)
5)
1)
4) 5)
8
8 - 13