Mitsubishi Electric GOT2000 Series User Manual page 468

*2
*3
*4
*5
(2) Start operation using the special function switch
If a special function switch with the following settings is touched, the motion SFC monitor can be launched.
• Select [Motion SFC Monitor] in [Action] and select [Program Batch Monitor Window] or [SFC Diagram] for [Display
Screen].
Operation at start differs depending on the setting contents of the special function switch.
For the setting items for the special function switch, refer to the following.
➠
Select [Program Batch Monitor Window] in [Display Screen].
(Set [CH No.] and [Network] as well.)
Select [SFC Diagram] in [Display Screen].
(Set [CH No.], [Network] and [File Name] as well.))
(a) Operations for selecting [Program Batch Monitor Window]
Motion SFC monitor
startup
(b) Operations for selecting [SFC Diagram]
Motion SFC monitor
startup
14 - 6
14.3 Operations for Display
For how to set special function switches, refer to the following.
➠
GT Designer3 (GOT2000) Screen Design Manual
For the details, refer to the following.
➠
14.4.6 Communication setting window
For the details, refer to the following.
➠
14.4.5 Program batch monitor window
For the details, refer to the following.
➠
14.4.1 SFC diagram monitor screen
POINT POINT POINT
(1) How to display the utility
For how to display the utility, refer to the following.
➠
GOT2000 Series User's Manual (Utility)
(2) Reading data from PLC when reclosing GOT
Save the motion SFC program in the SD card for the motion SFC monitor.
Reading the motion SFC program is not required when restoring the power supply of the
GOT.
➠ 14.3.1 Setting motion SFC program storage location
(3) When GOT has not project data
The motion SFC monitor can be started with the utility even though the GOT has no project
data.
GT Designer3 (GOT2000) Screen Design Manual
Setting
Automatic read of the
→
motion SFC program
Automatic read of the
→
motion SFC program
Operation for touching the special function
➠
(a)
➠
(b)
Program batch
→
monitor window
SFC diagram monitor
screen (File name set
→
for the motion SFC
program)
switch