Mitsubishi Electric GOT2000 Series User Manual page 187

Error message
The device range has been
changed. Please read the file again.
Cannot read programs other than
SFC program.
Description
The GOT cannot read the target device
values of the sequence program monitor
(SFC) because the device range is
changed in the PLC parameter setting
during the sequence program monitor
(SFC).
The program file specified by a key on
the block list screen or the SFC diagram
monitor screen is not a SFC program.
Corrective action
Operate the GOT for reading the file from the PLC.
Specify a SFC program by a key on the block list screen
or the SFC diagram monitor screen.
5.8 Error Messages and Corrective Action
5
5 - 37