Mitsubishi Electric GOT2000 Series User Manual page 217

2) [CtrlSt Info]
The following shows the display items.
Item
[Spc Ctrl Sta]
[Curr Ctrl Sta]
[Com Info]
[SubCtrl Sta Com]
3) [D-Link Info]
The following shows the display items.
Item
[Total of L-Sta]
[Largest Nrm Sta]
[Largest DL-Sta]
[Com Status]
[Cause of Ssp]
[Cause of Stop]
4) [Constant LS]
The following shows the display items.
Item
[Constant LS]
[---] is displayed.
[---] is displayed.
[---] is displayed.
[---] is displayed.
Displays the total number of stations on the monitored network set for common parameters.
Displays the maximum station number of the station communicating normally.
Displays the maximum station number of the station performing a data link.
Displays the current communication status of the host station.
• [D-Link in prog.]
• [B-Pass excut]
• [B-Pass stopped]
• [Offline test]
• [Offline]
Displays the reason for the interrupted communication.
[Normal Comm] is displayed with normal communications.
• [Cable disconnct]
• [Disconnct/retrn]
• [Offline mode]
• [Offline test]
When the station is in the hardware test mode, offline test mode, or self-loopback test mode,
[Offline test] is displayed.
Displays the reason for the interrupted data link.
[Normal] is displayed with normal data links.
• [Stop disignat]
• [D-Link time up]
• [No Slave Sta.]
• [Param not rcvd]
• [Invlid Host No.]
• [Set Rsvd Sta.]
• [Dup Host No.]
• [Dup Master Sta.]
• [Sta No. not set]
• [Host Para error]
• [Params in comm.]
• [Station Type]
• [CPU stop error]
• [Ring connection]
Displays the set contact link scan time.
Description
Description
Description
6.4 Operation Procedures
6
6 - 29