Mitsubishi Electric GOT2000 Series User Manual page 65

(2) Key functions
1) CH No. selection key
Select the CH No. for connecting the monitor target.
2) [×] key
Closes the communication setting window.
When any of the CH No., network No., station No., and CPU No. is not input and the monitor target is not set,
the communication setting window does not close.
3) Input area move key
Moves the cursor among the input areas.
4) [Enter] key
Moves the cursor when the cursor is in the CH No. input area, network No. input area, or station No. input area.
When the cursor is in the CPU No. input area and settings for the CH No., network No., and station No. are
completed, the communication setting window closes and the PLC read screen appears.
5) [Del] key
Deletes an input value or character.
6) [AC] key
Deletes all the input values and characters.
2)
3)
1)
3.3 Operations Common to the Monitor Screens
2)
3)
4) 6)
5)
3
3 - 21