Data Setting - Mitsubishi Electric F930GOT-BWD Operation Manual

Graphic Operation Terminal GOT-F900
18.6.7

Data Setting

The "Data Setting" object automatically displays the ten- or sixteen-key pad (keyboard) and
allows change in the set or current value of a specified word device when a specified touch key
is pressed.
As the key pad is displayed only when it is required, the screen can be used efficiently.
The "Data Setting" object is called keyboard call type. The "Keyboard" object described later is
called keyboard resident type. These objects can be used in accordance with the situation.
u u u u Contents of setting
Attribute
Control Input
Position
Keyboard Type
User ID
1) Position
Enter the X and Y coordinates of the start point from which the keyboard is displayed.
2) Keyboard Type
3) User ID
Enter the ID No. of the "Number" or "Ascii" object whose data is to be changed. The object
having this ID can now be changed.
n n n n Important point
Data change
The data can be changed without using the "Data Setting" function. When the displayed
"Number" or "Ascii" object is touched, the ten-key pad is displayed to enable data change.
(Refer to Paragraph 9.5.)
Enter a key which displays the keyboard.
Enter the keyboard display position.
Enter the keyboard type.
Enter the user ID of an object whose data is to be changed.
123.56
CHANGED DATA
7 8
4 5
1 2
0
Creation of Display Screens (FX-PCS-DU/WIN-E) 18
Contents of setting
9
CLR
6
3
-
ENT
ß1)
ß2)
ß3)
18-52