Mitsubishi Electric GOT2000 Series User Manual page 370

10 - 28
10.3 Operations for Display
POINT POINT POINT
(1) Setting password
For ensuring the security, setting a password of 8 or more characters that cannot be easily
guessed is recommended.
When the password is leaked, the same system can be created. Pay enough attention to
managing the password.
(2) Inputting a password for the motion controller CPU
When a password for a motion controller CPU data is input, the GOT does not display the file
name.
The GOT displays the data type only.
(3) Setting a password for the motion controller CPU
When contents of the following motion controller CPU data do not exist, do not set any
passwords for the data.
• SFC program
• Mechanical system program
• Cam data
When passwords are set for the data without any contents, the automatic password
authentication is unavailable when the GOT executes the backup.
As a result, the user must input the passwords each time.
(4) FXCPU keyword
To back up or restore data in the FXCPU, disable a keyword in advance.
➠
10.4.1 ■2. Key functions