5) [Error Record]
Displays the error record.
The number of error events to be displayed varies depending on the monitored PLC CPU.
• When monitoring the RCPU
Up to 16 error events can be displayed.
• When monitoring the QCPU (Q mode) or LCPU
Up to 100 error events can be displayed.
When using the LCPU, touch the error record to display the error detail screen.
➠
(2) Error details screen
(b)
Key functions
The following shows the functions of the keys that are used for the operations on the PC information monitor
screen.
1) [Sys. Conf.] key
Switches the screen to the System Configuration screen.
➠
8.4.1 Composition of the system configuration screen and key functions
2) [END] key
Closes the monitoring and returns the screen to the one for starting the intelligent module monitor.
3) Up/down scroll key
Scrolls the display one page up or down.
4) [Cont. Error] key
This key is displayed when the RCPU or LCPU is monitored.
Shifts to the Continuation error clear screen.
➠
(3) Continuation error clear screen
8.4 Operation of Each Intelligent Module Monitor Screen
1)
2)
3)
4)
8
8 - 15