Mitsubishi Electric GOT2000 Series User Manual page 83

Item
Device number
Device comment
Device value
Display format
7) Message display
Displays error messages.
8) [Register] key
Registers the start device of monitor targets.
Displays the device entry window when touched.
➠ 3.3.5 ■2. Window for entering the device
9) [test] key
Carries out a test operation.
➠
3.3.8 Test operation for the monitor device ([Test])
10) [Layout] key
Changes the display of items.
The display of the following items can be changed.
• Number of the columns of the devices to be displayed
• Comments (can be switched between displaying and hiding)
➠ 3.3.9 Switching the display (number or columns, comment display) ([Layout])
11) [Change comment] key
The comment file to be displayed can be switched.
Touch the key to display the comment file list dialog.
➠ 3.3.11 File switching for comment display ([Change comment])
12) [Local monitor] key
Starts or ends the local device monitor.
➠
3.3.10 Monitoring local devices ([Local monitor])
13) [Connect] key
Switches the monitor target for the device monitor.
Touch the key to display the communication setting dialog.
➠
3.3.4 ■2. Communication setting dialog
Displays the device number of the monitor device.
Displays the device comment set for the monitor device.
Displays the device value of the monitor device.
Represents the display format of the device value.
The display format can be changed when touched.
The character on the left represents the data range of the device.
• [W]: Word (16 bits)
• [D]: Double-word (32 bits)
• [L]: Longword (64 bits)
The character string on the right represents the display format of the device value.
• [K±]: Signed decimal
• [K+]: Unsigned decimal
• [HEX]: Hexadecimal
• [BIN]: Binary
• [EXP]: Exponential notation
• [FIT]: Decimal representation
Description
3.5 Batch Monitor
3
3 - 39