22. iQSS UTILITY
22.1 Features
With the iQSS utility function, the GOT can display information of the selected iQSS-compatible device by mounting a data
storage having profile data of iQSS-compatible devices on the GOT.
You can also start, operate, and maintain the selected iQSS-compatible devices.
Mount a data storage
in which profile data is
stored on the GOT.
The GOT displays the
information of the selected
device and allows startup,
operation, and maintenance.
Centralized management
with an engineering tool,
such as GX Works2
22.2 Specifications
➠
22.2.1 System configuration
22.2.2 Access range
22.2.3 Precautions
22.2.1
System configuration
This section explains the GOTs that support the iQSS utility, the target PLCs, and the connection types between the GOT
and PLC.
For connection type settings and precautions regarding the communication unit, cable, and connection type, refer to the
following.
➠
GOT2000 Series Connection Manual (Mitsubishi Products) For GT Works3 Version1
For the connection between iQSS-compatible devices and a PLC, refer to the following.
➠
MELSEC-Q/L AnyWireASLINK Master Module User's Manual
■1. Target controller
*1
QCPU (Q mode)
*2
LCPU
*1
Excluding Q12DCCPU-V, Q24DHCCPU-V, Q24DHCCPU-VG, Q24DHCCPU-LS, QJ72BR15, QJ72LP25G, and QJ72LP25-25
*2
Excluding LJ72GF15-T2
GOT
computer
Controller
PLC
iQSS-compatible devices
22.1 Features
22
22 - 1