23.5.2
Operating procedure
This section describes the operations on the graph display area.
➠
■1. Zoom in mode
■2. Move mode
■3. Cursor display
■1. Zoom in mode
Enlarge a part of the graph display area by the following procedure.
Step 1.
Touch the zoom in mode key.
Step 2.
Touch the start point of an area to be enlarged.
Step 3.
Slide your finger on the display and release the finger at the end point.
A square with the start point on the top left corner and the end point on the bottom right corner appears to
indicate the area to be enlarged.
1.
2.
3.
23.5 [Graph waveform] screen
23
23 - 23