Communication Setting Window - Mitsubishi Electric GOT2000 Series User Manual

14.4.6

Communication setting window

Set the motion controller CPU to be monitored.
■1. Displayed contents
(When the CH No. is input)
No.
1) CH No. input area
2) Network No. input area
3) Station No. input area
4) CPU No. input area
5) CH No. selection key
6)
■2. Key functions
Key
14 - 18
14.4 Operation Procedures
1) 3) 4) 2)
Item
Set the CH No. for the target controller.
Set the network No. for the target controller.
Set the station No. of the target controller.
When the station No. is set to the host station (FF), set the network No. to 0.
Set the CPU No.
Select a CH No.
Keys Keys for operations in the communication setting window shown in (b). (Touch input)
Closes the communication setting window.
When any of the CH No., network No., station No., and CPU No. is not input and the
monitor target is not set, the communication setting window does not close.
Moves the cursor among the input areas.
The operation differs depending on the status at touch.
When the cursor is in the CH No. input area, network No. input area, or station No. input
area:
Moves the cursor.
When the cursor is in the CPU No. input area and settings for the CH No., network No.,
and station No. are completed:
The communication setting window closes and the PLC read screen appears.
Displays the password input window when the read motion SFC program requires a
password.
➠
14.4.7 Password input window
When the program does not require any password, the program batch monitor window
appears.
➠
14.4.5 Program batch monitor window
Deletes an input value or character.
Deletes all the input values and characters.
1) 3)
5)
(When the network No., station No., and CPU No. are input)
Display contents
Function
4) 2)
6)