Tc Monitor (Monitoring Timers And Counters) - Mitsubishi Electric GOT2000 Series User Manual

3.6

TC Monitor (Monitoring Timers and Counters)

The TC monitor is a function that monitors only timers (T) and counters (C).
At the start of the TC monitor, the program list dialog appears.
Select the target program for monitoring and start monitoring.
1) Program file list
Lists program files that can be the targets for the TC monitor.
A file can be selected by touching the file name.
2) [Cancel] key
Closes the program list dialog without starting the local device monitor.
3) [OK] key
Starts the local device monitor of the selected program.
■1. Screen display and the key function
1)
2)
6)
7)
1) Monitor category display
Displays a monitor category of the monitor screen that is currently displayed.
2) Monitor category change key
Use this button to select a monitor category.
Select from [Selected], [Series], and [BM monitor].
3) Screen switching key ([4 screen], [One large screen])
Switches the screen display between the full screen display and the quad screen display.
4) [Exit] key
Exits the device monitor.
5) Monitor target display
Displays the channel No., network No., station No., and CPU No. of the monitor target.
3 - 40
3.6 TC Monitor (Monitoring Timers and Counters)
1)
10)
8) 9) 11)
2)
3)
14)
12) 13)
3)
4)
5)