Devices And Range That Can Be Monitored; Access Range; Precautions - Mitsubishi Electric GOT2000 Series User Manual

13.2.2

Devices and range that can be monitored

(○: Possible, ×: Impossible)
Device
Input
Output
Auxiliary relay
State
Timer contact
Counter contact
Data register
Index register
Index register
Nesting
Pointer
Interrupt pointer
Extension register
13.2.3

Access range

For the FX ladder monitor can monitor only the host station.
13.2.4

Precautions

■1. Precautions to be taken while the FX ladder monitor is activated
While the FX ladder monitor is activated, do not perform the following for the GOT.
Otherwise, the stored data may be deleted or the FX ladder monitor may not operate normally.
• Open or close the SD card cover
• Installing/removing the data strage
■2. Ladder display
Up to 24 lines can be displayed per ladder block.
If a sequence program is written in which 24 or more lines are used in a ladder block, the ladder cannot be correctly
displayed. It is advisable to divide such programs.
■3. During PLC reading
During PLC reading, only the host station is read.
Device range
X000 to X337 (octadecimal)
Y000 to Y337 (octadecimal)
M0 to M8511
S0 to S4095
T0 to T511
C0 to C255
D0 to D8511
V0 to V7
Z0 to Z7
N0 to N7
P0 to P4095
I00* to I30* (four points) : Fx0
I00* to I50* (six points) : Fx1, Fx2
I6** to I8** (three points) : Fx1, Fx2
I010 to I060 (six points) : Fx1, Fx2
R0 to R32767
Device monitor
Ladder display
display
○ ○
○ ○
○ ○
○ ○
○ ○
○ ○
○ ○
○ ○
○ ○
○ ×
○ ×
○ ×
○ ○
13.2 Specifications
Search operation
○
○
○
○
○
○
○
○
○
×
×
×
○
13
13 - 3