Specifications; System Configuration - Mitsubishi Electric GOT2000 Series User Manual

17.2 Specifications

➠
17.2.1

System configuration

This section describes the GOTs that support the CNC monitor, the target CNCs, and the connection types between the
GOT and the CNC.
For connection type settings, precautions regarding the communication unit/cable, and connection type, refer to the
following.
➠
■1. GOT
The CNC monitor is available on GT27-X, GT27-S, and GT25-S.
■2. Target controller
CNC C70, MELDAS C6/C64
■3. Connection type
This function can be used in the following connection types.
○: Available, ×: Unavailable
Name
CNC monitor
*1
*2
*3
*4
■4. Required system application (extended function)
For the system application (extended function) required, refer to the following.
➠
(1) System application (extended function)
Write the package data that contains the system application (extended function) for the CNC monitor to the GOT.
For the communication method with the GOT, refer to the following.
➠
(2) Space for the system application (Extended function)
To install a system application (extended function) to the GOT, enough space in the user area is required.
For information on how to check the available space of the user area and each data size, refer to the following.
➠
■5. CNC function that can be monitored
The following functions can be monitored with the CNC monitor.
For the details of each function, refer to the manual of each CNC.
Item
Position display
17 - 2
17.2 Specifications
17.2.1 System configuration
17.2.2 Access range
17.2.3 Precautions
GOT2000 Series Connection Manual (Mitsubishi Products) For GT Works3 Version1
Controller
Function
Description
Monitors CNC C70 or
MELDAS C6/C64, and
changes its parameter.
Available only for CNC C70.
Available only for MELDAS C6/C64.
When the CC-Link IE Field Network Ethernet adapter module is used, the CNC monitor cannot be used.
Applicable only with the Display I/F connection.
1.2 System Applications (Extended Functions) Required for Each Function
GT Designer3 (GOT2000) Screen Design Manual
GT Designer3 (GOT2000) Screen Design Manual
Position
Coordinate
Command
Program search
PLC switch
Common variable
Local variable
Connection type between GOT and CNC
Bus connection
Ethernet connection
*1
○
Description
*3
MELSECNET/10 connection
*4
○
CNC C70 MELDAS C6/C64
○
○
○
○
×
○
○
*2
○
○
○
○
○
○
○
○