Mitsubishi Electric GOT2000 Series User Manual page 121

POINT POINT POINT
(1) Restrictions on ladder blocks that can be edited with the sequence program monitor
(2) Displaying the Ladder editor screen when setting the security
(1) Enter ladder program window
Editing sequence programs is available.
(a) Displayed screen
1)
1)
The following table shows the displayed contents.
No.
1) Ladder symbol display area
2) Text display area
3)
POINT POINT POINT
Types of statements and notes that can be entered
Statements and notes that can be entered are integrated statements and notes.
Peripheral statements and notes cannot be entered.
(If the * is entered at the start of statements and notes, an error occurs.)
(ladder)
In the sequence program monitor (ladder), ladder blocks exceeding 25 lines cannot be
edited.
Even ladder blocks displayed within 24 lines with GX Works2/GX Developer may be
displayed exceeding 25 lines on the GOT.
By setting the security on GT Designer3 (GOT2000), the display of the Ladder editor screen
can be limited.
For the security setting, refer to the following.
➠
4.3.4 Setting the security
(Reduced size)
2)
Item
Displays the ladder symbol selected in the ladder display area.
Displays devices, sequence programs, statements, and notes selected in the
Ladder symbol display area.
The cursor is displayed at the position to be input.
If devices, sequence programs, statements, and notes are not fully displayed in the
display area, move the cursor to the border of the side where the display was cut,
and touch the cursor to scroll the displayed contents.
Only one-byte alphanumeric characters can be input for statements and notes.
If characters other than one-byte alphanumeric characters input on GX Works2/GX
Developer are deleted on the GOT, they cannot be input again.
Keys Keys for operations in the Enter ladder program window shown in (b).
2)
Description
4.7 How to Operate Ladder Editor Screen
3)
3)
3)
4 - 33
4