Mitsubishi Electric GOT2000 Series User Manual page 555

Step 3.
Touch the [Device] key to display the device selection window.
Step 4.
Touch [A:Standard SD card] on the device selection window.
Step 5.
Select the file to be compared from the list.
Step 6.
Touch the [Exec] key to start the comparison.
• When the files match
A completion message is displayed.
• When the files do not match
The comparison error detail window is displayed.
➠
(1) Comparison error detail window
When the software version of the CNC is earlier than D2, the comparison error detail window does not
appear.
3. 3. 3.
4. 4. 4.
5. 5. 5.
6. 6. 6.
18.4 Operation Procedures
18
18 - 11