Key Input - Mitsubishi Electric GOT2000 Series User Manual

20.4.2

Key input

■1. Using the software keyboard
The following describes the software keyboard displayed on the CNC monitor 2 screen.
1) Data setting keys
Input alphabets, numbers, spaces, and symbols.
Touching each key inputs the character on the upper half of the key. To input a character on the lower half of a
key, touch the [SHIFT] key.
2) [LIST] key
Lists the menu configurations of all screens.
3) Help key
Displays the parameter guidance and alarm guidance.
4) System switching key
When multiple systems are used, touching this key displays the data of the subsequent system.
If a common system screen is displayed or only one system is used, touching this key does not change the
display.
5) Page switching key
When multiple pages exist, touching this key displays the previous page or the next page.
6) Cursor movement keys (right/left)
Move the cursor left or right one display item on the screen.
7) Cursor movement keys (up/down)
Move the cursor up or down one display item on the screen.
8) Cursor movement keys (within a display item)
Move the cursor left or right one character within a display item on the screen.
9) [DELETE INSERT] key
Deletes the character under the cursor.
To switch to the insert mode, touch the [SHIFT] key and then the [DELETE INSERT] key.
10) [C.B CAN] key
Deletes the row under the cursor on the edit screen.
Clears the value under the cursor on a screen other than the edit screen.
To delete all of the contents on the edit screen, touch the [SHIFT] key and then the [C.B CAN] key.
11) [SHIFT] key
Selects the character or function on the lower half of each key.
12) [INPUT] key
Confirms the setting and writes the data to the CNC C80.
20 - 8
20.4 Operating Procedure
2) 3) 4) 5) 6) 8) 7) 8) 9) 10)
1)
11)
12)