Mitsubishi Electric GOT2000 Series User Manual page 337

(2) Key functions
The table below shows the functions of the keys that are used for the operations of the positioning operation screen.
6)
7)
8)
9)
10)
11)
1) [Menu] key
Returns to the function selection menu screen.
2) [End] key
Exits the servo amplifier monitor.
3) [Forward] key
Runs the servo motor in the forward rotation (CCW) direction.
4) [Reverse] key
Runs the servo motor in the reverse rotation (CW) direction.
5) Operation key
The displayed key varies depending on the connected servo amplifier.
Item
[Pause] key
[Restart] key
[Clear] key
6) [Motor speed] key
Changes the rotation speed of the servo motor.
7) [Acc/dec time] key
Changes the acceleration/deceleration time constant.
8) [Move distance] key
Changes the distance.
9) [JOG] key
Changes to the JOG operation screen.
➠
■4. JOG operation screen
10) [Without Motor] key
Changes to the motor-less operation screen.
➠
■6. Motor-less operation screen
11) [DO ForcedOutput] key
Changes to the DO forced output screen.
➠ ■7. DO forced output screen
12) 13)
Stops the rotation of the servo motor temporarily.
This is displayed only when MELSERVO-J2-Super series or MELSERVO-J2M series is
connected.
Resumes the rotation of the paused servo motor.
This is displayed only when MR-J3-□A series or MR-J4-□A is connected.
Deletes the remaining distance of the paused servo motor.
This is displayed only when MR-J3-□A series or MR-J4-□A is connected.
9.4 Operations of Servo Amplifier Monitor Screens
1) 2)
3)
4)
5)
Description
9
9 - 37